All items are in original boxes and shipped from Japan.
Condition : New, all accessories are included.
This sound module uses Prismatic Sound Modeling technology to provide high-quality sound and expressiveness like an acoustic drum. Equipped with three digital trigger inputs, it provides natural drum performance expression. It also has a wide range of practice functions and Bluetooth connection function. You can easily train.
The TD-27 is equipped with the "Prismatic Sound Modeling" that was well received in the TD-50, and can also connect digital pads such as the PD-140DS and CY-18DR equipped with multi-element sensors. By organically combining V-Drums' advanced sampling and modeling technology over more than 20 years, it achieves the highest expressiveness and playability of electronic drums.
The TD-27, which is the sound source for the VAD506 and VAD503, is equipped with 55 new presets that focus on acoustic kits. It is a V-Drums sound source that will satisfy all drummers.
1. Equipped with the unique modeling technology "Prismatic Sound Modeling" that was well received in the flagship sound source "TD-50". Realizes drum sounds with a vivid resonance and rich expressiveness.
2. Supports connection of digital pads equipped with multi-element sensors.
3. Increased number of built-in instruments, equipped with 55 new preset kits.
4. Equipped with new ambience technology "PureAcoustic Ambience technology" that makes the most of acoustic sounds.
Equipped with EQ, compression, and transients that are essential for sound making.
5. Equipped with 28 out / 4 in USB audio interface function that is convenient for multi-track recording on a PC.
6. Wirelessly connect mobile devices such as smartphones via Bluetooth and play audio from the TD-27.
7. Equipped with two direct outs that are convenient for live performances and recording.
■Number of drum kits: 100 (presets: 55)
■Number of tones: 728
■User samples: Maximum 500 user samples (including factory-installed user samples), Sound length (total): 24 minutes in mono, 12 minutes in stereo, Importable file formats: WAV (44.1kHz, 16/24-bit)
■Effects: Pad compressor (per pad), pad equalizer (per pad), overhead mic simulator, room/reverb, multi-effects: 3 systems/30 types, master compressor, master equalizer
■Bluetooth: Compatible standards = Bluetooth standard Ver 4.2, Compatible profiles = A2DP (audio) GATT (MIDI over Bluetooth Low Energy), Compatible codecs = SBC (supports content protection using the SCMS-T method)
■Song player (SD card): File format: WAV (44.1kHz, 16/24-bit), MP3 * Audio files are stored on the SD The data must be saved on the card.
■Recorder: Recording method = real-time, maximum recording time = 60 minutes (temporary recording: 3 minutes)
*An SD card is required for recording. If there is no SD card, temporary recording of about 3 minutes is possible, but it cannot be saved to the main unit.
File format = WAV (44.1kHz, 16-bit)
■Display: Graphic LCD 256 x 80 dots ●External memory: SD card (SDHC compatible)
■Connection terminals
1 TRIGGER INPUT terminal (kick, snare, tom 1, tom 2, tom 3, hi-hat, crash 1, ride, ride bell, hi-hat control): 25-pin D-sub type *Exclusive use with digital connection compatible pads.
4 TRIGGER IN terminals (crash 2, AUX 1, AUX 2, AUX 3): Standard TRS type *Exclusive use with digital connection compatible pads.
3 DIGITAL TRIGGER IN terminals: USB A type, 2 MASTER OUT terminals (L/MONO, R): standard type, 2 DIRECT OUT terminals: (MONO) standard type, 1 PHONES terminal: stereo standard type, 1 MIX IN terminal: stereo standard type, MIDI terminal (IN, OUT/THRU), 1 USB COMPUTER terminal: USB B type, 1 FOOT SW terminal: TRS standard type, DC IN terminal ■ USB COMPUTER terminal Speed = Hi-speed USB, Driver mode = Generic/Vendor, Supported communication = USB-MIDI/USB-Audio * To use USB audio, you need to change to vendor mode and use the vendor driver. ■ USB Audio Sampling frequency (original) = 44.1kHz, Sampling frequency (using sampling rate converter) = 96kHz, 48kHz, Recording = 28 channels, Playback = 4 channels
■ Power supply: AC adapter (DC9V) ● Current consumption: 770mA
■ Accessories: Quick start (including warranty), AC adapter, dedicated connection cable, user registration card, "Safety precautions" leaflet, sound source mounting plate, thumbscrews (M5 x 10) x 2 * SD card is not included with the product.
■Optional items
Pads: PD series, PDX series, BT series
Cymbals: CY series
Kicks: KD series, KT series
Hi-hat: VH-13, VH-11, VH-10
Hi-hat control pedal: FD series
Acoustic drum trigger: RT series
Footswitch: BOSS FS-5U, FS-6
Personal drum monitor: PM series
Noise eater: NE series
■External dimensions: 238 (W) x 204 (D) x 79 (H) mm
■Weight (excluding AC adapter): 1.1 kg
Please note :
If the product cannot be shipped within 10 business days due to the manufacturer's stock being out of stock, we will refund your money after contacting us.
Import duties, VAT and other taxes and their associated charges are not included in the item price or shipping charges.