All items are in original boxes and shipped from Japan.
Condition : New, all accessories are included.
NEO by OYAIDE Elec SP-3398 SPS 1.0m Speaker Cable
Plug: SPS (Speakon-Straight Phone)
Length: 1.0m
The second in the "3398" series following the DC-3398 LL.
A speaker cable for stack amps made of four twisted 3398-16s.
■A thorough brush-up of the sound outlet.
With the release of the DC power cable "DC-3398 LL", the number "3398" quickly became widely known.
Using precision conductor "102 SSC" and complying with the American UL standard AWMstyle3398 with a voltage resistance of 300V and heat resistance of 150℃, the OYAIDE "3398" has been proven by the DC-3398 LL to be a wire that can fully bring out the quality and potential of musical instruments.
But this is not the only place where the characteristics of this "3398" are utilized. It is the speaker cable, the final exit route for the sound of the instrument.
■A wire structure that makes the most of the characteristics of the precision conductor "102 SSC".
The fresh base material and the overwhelmingly beautiful wires produced by mechanical peeling that scrapes the surface in μ units, which are characteristics of the precision conductor "102 SSC", have a significant impact on the skin effect. The wire structure for the AWG16 size used in the SP-3398 is 52/0.18. By using 52 0.18mm wires, not only the cross-sectional area but also sufficient skin area is secured. Since the resistance value has a significant effect on the sound quality of a speaker cable, smoothing the conductor is also very advantageous in the skin resistance of the speaker cable, contributing to improvements in sound resolution, speed, dynamic range, etc.
■A star-quad structure cable made exclusively for the SP-3398 series.
Speaker cables that handle signals amplified by an amplifier can carry very large powers, from several tens of watts to 100 watts, but the SP-3398 series uses a star-quad structure that twists four AWG16 wires, ensuring a generous cross-sectional area of 2.5 sq. per core. You can use it with confidence even with large capacity vacuum tube amplifiers.
The star-quad structure used in this SP-3398 achieves low inductance by twisting four 3398-16 cables together. The magnetic fields generated by the cable itself cancel each other out, so noise is significantly attenuated within the cord compared to normal cables. This excellent transmission efficiency without unnecessary magnetic lines reduces transmission delays and deviations, and contributes to improving phase and sound output speed.
At the same time, the four-twist structure not only ensures sufficient cross-sectional area, but also realizes flexible handling that is less likely to become kinked. In addition, having two each of the + and - wires is a major advantage in that it halves the risk of breakage.
[SP-3398 product specifications]
Conductor: “102 SSC” AWG16x2 (2.5sq)
Insulator: XLPE
Standards/ratings: UL standard AWM Style 3398, VW-1 / 150℃ 300V (peak voltage 600V)
Please note :
If the product cannot be shipped within 10 business days due to the manufacturer's stock being out of stock, we will refund your money after contacting us.
Import duties, VAT and other taxes and their associated charges are not included in the item price or shipping charges.
Condition : New, all accessories are included.
NEO by OYAIDE Elec SP-3398 SPS 1.0m Speaker Cable
Plug: SPS (Speakon-Straight Phone)
Length: 1.0m
The second in the "3398" series following the DC-3398 LL.
A speaker cable for stack amps made of four twisted 3398-16s.
■A thorough brush-up of the sound outlet.
With the release of the DC power cable "DC-3398 LL", the number "3398" quickly became widely known.
Using precision conductor "102 SSC" and complying with the American UL standard AWMstyle3398 with a voltage resistance of 300V and heat resistance of 150℃, the OYAIDE "3398" has been proven by the DC-3398 LL to be a wire that can fully bring out the quality and potential of musical instruments.
But this is not the only place where the characteristics of this "3398" are utilized. It is the speaker cable, the final exit route for the sound of the instrument.
■A wire structure that makes the most of the characteristics of the precision conductor "102 SSC".
The fresh base material and the overwhelmingly beautiful wires produced by mechanical peeling that scrapes the surface in μ units, which are characteristics of the precision conductor "102 SSC", have a significant impact on the skin effect. The wire structure for the AWG16 size used in the SP-3398 is 52/0.18. By using 52 0.18mm wires, not only the cross-sectional area but also sufficient skin area is secured. Since the resistance value has a significant effect on the sound quality of a speaker cable, smoothing the conductor is also very advantageous in the skin resistance of the speaker cable, contributing to improvements in sound resolution, speed, dynamic range, etc.
■A star-quad structure cable made exclusively for the SP-3398 series.
Speaker cables that handle signals amplified by an amplifier can carry very large powers, from several tens of watts to 100 watts, but the SP-3398 series uses a star-quad structure that twists four AWG16 wires, ensuring a generous cross-sectional area of 2.5 sq. per core. You can use it with confidence even with large capacity vacuum tube amplifiers.
The star-quad structure used in this SP-3398 achieves low inductance by twisting four 3398-16 cables together. The magnetic fields generated by the cable itself cancel each other out, so noise is significantly attenuated within the cord compared to normal cables. This excellent transmission efficiency without unnecessary magnetic lines reduces transmission delays and deviations, and contributes to improving phase and sound output speed.
At the same time, the four-twist structure not only ensures sufficient cross-sectional area, but also realizes flexible handling that is less likely to become kinked. In addition, having two each of the + and - wires is a major advantage in that it halves the risk of breakage.
[SP-3398 product specifications]
Conductor: “102 SSC” AWG16x2 (2.5sq)
Insulator: XLPE
Standards/ratings: UL standard AWM Style 3398, VW-1 / 150℃ 300V (peak voltage 600V)
Please note :
If the product cannot be shipped within 10 business days due to the manufacturer's stock being out of stock, we will refund your money after contacting us.
Import duties, VAT and other taxes and their associated charges are not included in the item price or shipping charges.